Self Loading Forklift

 Self-Loading Forklift – An Ultimate FAQ Guide 2022

What are the different components that make up a Self-loading Forklift?

The Self-loading Forklift is made up of various parts that include:

• Lifting cylinder
• Control button
• Unfixed gate base
• Rack component
• Guide wheels
• Forks
• Internal gate post

What are Self-loading Forklift specifications?

When buying or selecting a Self-loading Forklift, specifications are an essential guide.

• Equipment capacity: 500kgs up to 1500kgs
• Wheel base length: 850mm to 960mm
• Maximum height: 1200 mm to 1500mm
• Minimum height: 90mm to 120mm
• Fork/frame height: 1300mm to 1650mm
• Lifting height: 2700mm to 3000mm
• Overall length: 1200mm to 1600mm
• Overall length: 750mm to 800mm
• Fork size: 1200x155x60
• Equipment lifting speed: 80mm/s to 120mm/s
• Descent speed: 70mm/s to 90mm/s
• Battery: 12v
• Wheel material: Nylon
• Battery charger

What are the Self-loading forklift packaging terms?

In general, we pack our goods following international packing standards, with some special considerations. We can pack the goods in your branded boxes after receiving your authorization letters if you have a legally registered patent.

Are Self-loading forklifts tested before delivery?

Yes, we ensure all equipment is tested, verified, and approved before any delivery is done. Before being released to the client, we also ensure that self-loading forklifts are inspected and certified as safe to operate.

Do you allow customization of Self-loading forklifts?

CubLiFT manufacturers high-quality Self-loading forklifts and other industrial equipment. We allow and accommodate client equipment customization requests.

What preparation do you need for Self-loading Forklifts operations?

For Self-loading forklifts to provide effective and efficient operations, you should do the following:

• Ensure the vehicle’s brakes are set to the maximum setting.
• Install fixed jacks to keep a self-loading forklift from upending when not connected to a vehicle.
• Place signs stating that you should not move the vehicle
• It would be best if you slammed the wheels of the vehicles
• To ensure that the combined weight of the lift and load on the ground can be supported.
• Make sure the front door is at least 5 cm or 2 inches above the forklift.
• Look for trash, loose objects, and obstructions in the vehicle’s interior, as well as gaps or unstable ground, low ventilation, and low clearance.
• Any area can become a hazard in poor weather, so install anti-slip material.
• Ensure that the docks and dock plates are free of obstructions and not wet or
• At loading docks, avoid gaps and drop-offs.
• Make use of dock levelers.

How do you load or unload using a Self-Loading Forklift?

Before loading and unloading the vehicle using a Self-loading forklift, the first thing to do is to ensure that the equipment is in good working order and that any breakdowns are reported as soon as possible.

• Keep the forks pointing downhill when traveling down a ramp without a load.
• Maintain a safe distance from marine, rail lines, and walkways.
• Keep the forks pointed uphill when traveling with a load on a walkway.
• Make sure the edges are marked.
• Do not lift or move trains or trucks with a Self-loading forklift.
• Forklifts should not be used inside vehicles for extended periods unless they are properly aerated.
• Before driving over the dock plate, double-check that it is securely fastened and capable of supporting the load.
• You should note the load’s weight.
• Drive slowly and carefully over the plate.

Can a Self-loading forklift be used in an Elevator?

Operating a Self-loading forklift in an elevator depends on various factors:

• You can only use the self-loading forklift in an elevator when authorized only.
• Ensure the elevator to be used is designed to fit the Self-loading forklift.
• Make sure the elevator’s capacity is not exceeded by the combined weight of the forklift and the load.
• Ascend the elevator slowly, stopping at a good distance from the elevator gate and entering it squarely.
• Apply the brakes, turn off the forklift, and neutralize the controls.

What is Self-loading forklifts prestart safety check?

You should carry out the Self-loading forklift prestart safety check at every start of its operations.

• Ensure the equipment load capacity and its weight capacity is considered.
• Inspect lift and tilt systems, including attachments such as hydraulic lines for oil leaks, clamps, chains, and cables, as well as whether limiters are working properly and safely.
• Check any wearing parts of the equipment and do the replacement.
• Verify that guarding is in place and working, such as around the battery compartment or fluid cylinders.
• Ensure that all warning devices are in working order.
• Check the levels of hydraulic oil.
• Inspects any deformation of fork arms and other attachments.

What is the Self-loading forklift moving procedure?

The following are procedures for moving a Self -loading forklift.

• Raise all lowered attachments to just above ground level (150-300 mm).
• Select forward or reverse after releasing the parking brake.
• Make sure the path of travel is clear.
• Sound the warning device when entering or leaving a confined space to alert personnel to the machine’s movement.
• Before moving onto the roads and into operating cycles, make sure the brakes and steering are working properly.

How do you maintain the control of a moving Self- loading forklift?

When using a Self-loading forklift, ensure the stability of the equipment. There are many factors to consider the control of a moving Self- loading forklift:

• Ensure the load is tilted backward.
• When moving with the equipment, ensure the forks are as close to the floor as possible and tilted back.
• Determine the moving speed with to the conditions of the road, load, and workplace.
• Reduce speed at all corners and keep an eye on the rear of the Self-loading forklift and the load, as well as pedestrians.
• Avoid abrupt stops.
• When a load blocks your vision, go backward and always ensure there is clearance.
• When entering an area or raising the forks, make sure there is enough overhead clearance.
• Observe the floor or roadway for oil spots, wet spots, loose objects, rough surfaces, people, and other vehicles.
• Keep a safe working distance away from all overhead power lines.

How do your safely park your Self -loading forklift?

When your self-loading forklift is not in use, ensure the forks are lowered, keep well clear of emergency exits, and allow clear access to firefighting equipment and refueling points by parking on level ground.

• All attachment control levers should be set to neutral or held.
• When lowering all raised attachments, make sure the fork tips are touching the ground.
• Allow no slack in the Self-loading forklift lift chains, as they may jump clear of the top carrier rollers.
• Apply any safety locks and place the transmission and forward-reverse levers in neutral.
• Please turn off the isolating fuel valve on an LPG-powered forklift before restarting it to prevent a buildup of explosive gases.

What do you consider when loading a Self-loading forklift?

When operating a forklift, the most important safety consideration is the forklift’s stability when loaded.

• A forklift can tip forward or sideways if the load on it makes it unstable.
• Before the pallet is lifted and moved, the load on it must be stable and well stacked.
• Use only good quality pallets;  should not use broken pallets.
• If the pallet is broken or appears to be overloaded, the load may need to be restocked.
• The load’s center of gravity should be as low as possible in the load, as far back as possible, and evenly distributed across the load.
• To ensure that the load is stable, place the heavy objects at the bottom and back of the load.
• Use strapping to secure the load if there is a risk of objects falling off.
• No part of the load should extend beyond the backrest of the carriage unless it didn’t slide back towards the driver.

How do you raise and transport a load using a Self-loading forklift?

The Self-loading forklift becomes less stable as the load is raised and before raising loads, make sure there is enough overhead clearance.

• Unless the forklift is stopped and braked before raising or lowering the fork, lift loads straight up or tilt slightly downward.
• As long as there is no way for any part of the load to slide back toward the operator, only lift a load that extends above the load handlebar.
• Pay attention to the Self-loading forklift controls when a load is raised. Put another way; the operator must remain on the forklift while the load moves up the ramp.
• If you don’t travel at an appropriate speed.
• Avoid turning on a slant because you might lose your balance.
• Do not come to a complete stop because the load may shift.
• Avoid operation Self-loading forklift on sloping or uneven terrain.

What are things to avoid when using a Self-loading forklift?

• Attempting to move or adjust any part of the load, the forklift, or the surroundings while on the forklift.
• A load that extends above the load backrest should not be lifted unless no part of the load can slide back toward the operator.
• Forklift-lifted pallets can be used as an improvised work platform.
• Enable anyone other than the operator to use the Self-loading forklift.
• Allow anyone to stand or walk under the elevated part of any forklift, whether loaded or unloaded.

What are the causes of Self-loading forklift tipping?

• Over speeding the Self-loading forklift.
• Turning rapidly.
• Operating it on a slopy or uneven surface.
• In the event that you are traveling with a heavy load.
• Loading the Self-loading forklift with an unbalanced load.
• Inflated tires or worn-out tires.
• Overloaded Self-loading forklift.

What makeup a Self-loading forklift hydraulic system?

The Self-loading forklift hydraulic system is made up of different parts such as:

• Accumulators
• Hydraulic fuse
• Control valve
• Filters
• Reservoirs
• Pressure relief pistons

What are Self -loading forklift buying factors to consider?

Buying a forklift truck requires a significant capital outlay on your part. Buying a new or used forklift is a big decision. Making sure you understand your options and business requirements is the most effective method of recovering your financing.

Selecting the right Self-loading forklift for your business is key, and do background research. Here are key buying factors for Self-loading forklift from CubLiFT:

• Equipment reliability and durability

Each forklift manufacturer has an ergonomic design. Our company, CubLiFT, Specializes in various types of forklifts, Self -loading forklifts being one of them. Equipment quality is the theme of the day for us. We also provide Self-loading forklift experts to guide and help our clients and potential customers.

• Cost vs Time Return on Investment (ROI)

Prospective forklift buyers should remember that the main objective of purchasing a Self-loading forklift is to discover the strengths and weaknesses of a forklift brand through deep analysis. To improve warehouse performance quality and boost productivity in the workplace.

As a result, the total cost of ownership is important to consider because the costs of owning a forklift do not end after the initial purchase price. Make sure to ask your supplier about the ongoing costs of your workhorse (maintenance, resale value, spare parts). Take notes and think about your purchase carefully to get a good return on your investment.

• Availability of Self-loading forklift spare parts

CubLiFT’s forklift attachments increase the productivity of forklifts. On the other hand, the safety work platform keeps your operators and workers safe within its railings and safety guards. Additionally, your supplier should have a wide range of spare parts readily available to reduce downtime on your forklift, in addition to a thorough understanding of the different attachments available.

To ensure future maintenance, ask your manufacturer or supplier about part availability for the specific model and brand of your choice.

• The business needs

When looking for a forklift, it’s easy for buyers to become overwhelmed by the amount of information they must process. Remember that just because a forklift is “good” doesn’t mean it’s “fit” for your business.

Understanding all business operations types enable you to select the right Self-loading forklift for your business.

• Self-loading forklift Capacity

Consider your average load weight, attachments, and any customer trends or changes you’ve seen in recent years when deciding on capacity.

Figure 3: An Image of Self-loading forklift           Figure 4: An Image of Self-loading forklift

• The overall equipment height

You can load the Self-loading forklift with heavy loads, but the height factor matters a lot. Start with your maximum load weight and select an appropriate mast for that weight or even a little heavier. You’ll need a mast with a free lift if your forklifts operate in and out of trailers or in an environment with low clearances.

• Type of Self-loading tire

This is another straightforward option. Cushion tires are a good choice if your forklift is primarily used indoors, such as in a warehouse or loading dock. They’re more affordable and have a smaller turning radius. Solid pneumatic tires are used in most outdoor applications. For specialty applications, other forklift tires (polyurethane, cold-prepped, and static-resistant) are available.

• Selected Manufacturer

CubLift is an authorized and best selection manufacturer for a wide range selection of forklifts. Using the same manufacturer’s equipment throughout your fleet can help you save money and maintain efficiency.

How does your Self-loading forklift work?

The Self-loading forklifts allow handing of pallets and loads with ease and safety.

Here is how the equipment is operated:

• Lift the pallet and move it on the wheels.
• Raise the load and position it in the vehicle.
• As you are lowering the load, the inner Self-loading forklift starts to climb up its mast.
• The system key is the patented trolley device; this is withdrawn from under the pallet, and the mast completes its travel to realign itself with the forks.
• Push back in the trolley and re-engage the wheels.
• Move the load forward to its position in the vehicle.
• The Self-loading forklifts then unload themselves by reversing the process without counterbalancing ballast; thus, they can load several palletized loads.

What are Safety precautions for a Self-loading forklift?

• Only allow qualified people to work and maintain equipment.
• Please review the manufacturer’s service and maintenance schedule.
• Wear appropriate PPE. Grind with goggles. Apron, gloves, and rubber boots are required when handling lead-acid batteries or battery charging equipment.
• Maintain a clean and well-lit work environment.
• Clean up any spilled oil or hydraulic fluid as soon as possible.
• Before using any tools, make sure they are in good working order.
• Before starting the Self-loading forklift, detach all equipment.
• Use caution when handling batteries.
• Using insulating material, cover the top of the battery.
• Protect battery terminals from metal objects like hoisting chains.
• Before making repairs, look over the operator’s daily checklist.
• Examine and replace any worn or missing nuts and bolts that secure the counterbalance to the body.
• You should do magnetic particle testing of the mainmast welds and forks once a year or whenever cracks appear.
• You should perform magnetic particle testing on all valves, fittings, clamps, and connections to the cylinders in the main mast assembly and the tilt control system.
• Examine the forks for twisted, bent, or distorted sections. Evaluate the problem area if defects are discovered.
• Confirm if the Self-loading forklift can handle the maximum load limit.

What are things to avoid during Self-loading servicing?

• Components, creepers, tools, and other barriers should not be left lying around.
• You shouldn’t lift more than you’re capable of. Use hoists or leverage tools to lift or move heavy parts or equipment.
• Around refueling and battery-charging areas, do not smoke, weld, or light a match.
• If a Self-loading forklift is on a lift hoist or wheel stand, do not start it.
• Work on forklift attachments only if you’re familiar with how they work.
• Work beneath elevated Self-loading forklift or forks only if approved blocks are securely supporting them.

After how long should a Self-loading maintenance inspection be done?

There are three types of maintenance inspection recommended by the forklift safety standard authority. Also, a Self-loading forklift maintenance inspection should be done by trained and authorized personnel.

• You should do a maintenance inspection according to the manufacturer’s recommendation.
• Do other inspections daily.
• Also, annual maintenance inspections should be planned prior.
• The Self-loading forklift’s lifting capacity is inspected to confirm if it can handle the maximum load specified on the nameplate. This is a test to see if the forklift can handle the maximum load listed on its nameplate. The inspection must be performed whenever a new owner purchases a Self-loading forklift and as often as the manufacturer recommends, but no less than once a year.

Why do I need a warranty for a Self-loading forklift?

CubLiFT ensures every manufactured equipment has a warranty policy. That allows the Self-loading forklift owners to go on with daily equipment operations with no worries. With a customized service agreement, you can expect high-quality service from your dealer, which will be performed, administered, and monitored.

Preventative maintenance is initiated when wear or problems are detected early during scheduled inspections. As a result, downtime due to unexpected failure is reduced.