Top Load Cell Manufacturer Companies You'd be Using in Thailand PAGE banner 1920x500

Load Cell Manufacturer Companies in Thailand (1)3

 Load cells are a typical device of force transducers. It converts the forces of tension, compression, pressure, and torque into measurable electrical output.


Thailand’s electronic market has shown explosive growth in the past 12 months. The demands for load cells and accessories are increasingly required from different lines of industries.

If you are looking for reliable load cell manufacturers and suppliers from the market locally, If you don’t know how to find superb load cells, we are here to help you to filter the competent load cell manufacturers anintrd suppliers. These companies are well-reputed both in Thailand and in global markets. HERE is the list for you to pick from below.

Kyowa Thailand

Kyowa Electronic Instruments has effectively brought together its uniquely acquired know-how and offers future-proof solutions to our clients’diverse and sophisticated needs. We will continue to support safety and security for our many corporate clients.

 We offer:

Small-sized Compression Load Cell The LMA-A is a compact & lightweight load cell for measuring compressive loads.

Corrosion-resistant Compression Load Cell The LC-J is a stainless-steel load cell for measuring compressive loads. It is corrosion-resistant.

Beam-type Load Cell The LUB-B is a beam-type load cell developed as a detector for a weighing system. Models of capacity from 1kN to 20 kN are made of special stainless steel.

Crane Load Cell The LTA-C-S is a crane load cell developed as the detector for jib crane weighing systems and for general tension measurement.

Pin-type Load Cell The LTP-S-S is a pin-type load cell for measuring crane hanging loads. It can be mounted in place of the axis of the crane’s pulleys.


Load Cell, Auto Weighing, Weighing Management, Weighing Systems

Hakaru+(Hakaru Plus)Scaleup your business Hakaru Plus Thailand

The strain caused by the load will be transduced to an electrical signal and output.

Two types are provided: compressive load and tensile load.


Variation of S type and beam type suitable for various types of hopper scales.

Types with an anti-vibration mechanism are used for tank scales.

One-point support is used for the Roberval mechanism.

There is a lineup of stainless steel types as well.

Tel: +66-2-136-5892

59 / 19 Moo 2 Golden Biz Bangna-Kingkaew,

Kingkaew Soi 6, Tambon Racha Thewa,

Aumphur Bangphli, Samutprakarn, 10540 Thailand



Dace is providing ultra-precision load cells and various weighing and measuring products, 

which can be used in various fields of industries, based on 20 years of experience in 

manufacturing weighing and measuring products and with its own superior technologies.

This strain gauge load cell has developed newly as an electronic “Scale” for commercial purposes, with the characteristics of high accuracy and low price.

Compared with other mechanical means, this load cell provides a small displacement.

Due to electronic output, it is easy to treat various treatments.


Load Cell Manufacturer Companies in Thailand (1)88

Our load cells have set the standard for decades. Whether it is analog or digital load cells, single point load cells, or bending beam load cells – it’s your choice! In addition, we offer the right weighing electronics and matching accessories for your application.

We offer HBM load cells:

Digital Load Cells

Beam load cells (sometimes called bending load cells) manufactured by HBM are employed in sectors where goods are processed, controlled, or produced.

Canister Load Cells

Tension / Compression Load

Weighing Modules

HBM provides weighing modules – comprising load cells and loading fittings – to prevent incorrect loading. They come pre-assembled.

Single Point Load Cells

Our single-point load cells offer a wide range of applications and are outstanding for their high natural frequency and weighing speed.

Load Cell Accessories

Force Sensors + Load Cells (N)

Weighing Terminals / Indicators

46/155 ถนนนวลจันทร์

แขวงนวลจันทร์ เขตบึงกุ่ม

กรุงเทพมหานคร 10230



K&B represents and sells all load cells of the Vishay brand, 

such as Model 3310 is a low profile shear beam load cell designed

for high accuracy platform scales, pallet scales, and process

weighing applications.

It has high immunity to shock or side loading and is available

in 2mV/V sensitivity.

เค แอนด์ บี เทคโนโลยี รับซ่อมและจัดจำหน่ายสินค้าเครื่องชั่งดิจิตอล โหลดเซลล์ อินดิเคเตอร์ คุณภาพ หลากหลายแบรนด์ชั้นนำ A&D, CELTRON, e-Accura, FLINTEC, JADEVER, KELI, TEDEA บริการ-แนะนำ ตลอดจนให้คำปรึกษาเกี่ยวกับข้อมูลสินค้าประเภทต่างๆ ทางเรายังมีบริการออกแบบและผลิตเครื่องชั่งดิจิตอลทุกชนิด เพื่อให้เหมาะสมกับธุรกิจของคุณ

โทรติดต่อสอบถามข้อมูลสินค้าได้ที่เบอร์ 0-2816-4978,

08-9792-8502, 08-1401-1781 หรือ


Load Cell Manufacturer Companies in Thailand (1)4

Radwag, in the year 1995, has manufactured 10 000 electronic balances and scales, two years later, in 1997, the first analytical balances has been 

We offer high precision balance scales, industrial scales, and industrial load cells.

46/155 Nuanchan Road, Nuanchan, Bungkum, Bangkok 10230, Thailand

Tel  : 02-3634417-21    

NMB-Minebea Thai

Load Cell Manufacturer Companies in Thailand (1)5


NMB-Minebea Thai Ltd. Is the leading manufacturer of small bearings, high-precision small motors, mechanical parts, and other electronic devices and components with ultra-precision machining and vertically integrated manufacturing systems.

MinebeaMitsumi manufactures load cells that use strain gauges to convert tension, compression, and mass into electrical signals. Load cells are connected to various measuring devices. that vary according to the purpose of use The results of the measurements can be displayed on the screen. record and control including being able to store measurement history.

There are different types of devices. From the sensors in electric scales Weight scales and fat mass measurement game console home appliances to general industrial measuring devices such as truck scales Various measurement systems in production and tank scales, etc.

มินีแบมิตซูมิผลิตโหลดเซลล์ที่ใช้สเตรนเกจในการแปลงค่าแรงดึง (Tension) แรงกด (Compression) และมวล (Mass).ให้ออกมาเป็นสัญญาณไฟฟ้า โหลดเซลล์จะถูกต่อเข้ากับอุปกรณ์ตรวจวัดต่างๆ ที่หลากหลายซึ่งแตกต่างกันไปตามจุดประสงค์การใช้งาน ผลจากการวัดสามารถแสดงผ่านหน้าจอ บันทึกและควบคุม รวมไปถึงสามารถเก็บประวัติการวัดได้

Bang Pa-In Plant (Head Office)

1 Moo 7, Phaholyothin Road, Km.51, Tambol Chiang Rak-Noi, Amphoe Bang Pa-In Ayutthaya Province 13180 Thailand

(035) 361429 – 361439

Flowmaster (Thailand) Co., Ltd.

The correct load cell for every nominal load

Our load cells cover a wide range of nominal loads, from 3kg up to 500t. As a standard, every load cell complies with accuracy class C3 in accordance with OIML R60.

Weighing and Batching systems are critical in many fields 

of industrial production. Whether you are involved in the 

processing of bulk materials in the basic industries, recipe 

processing of chemicals or pharmaceutical products or 

food packaging: Siemens can offer you solutions featuring 

absolute reliability and maximum precision.

31 Sukhaphiban 2 Rd., Prawet, Prawet, Bangkok 10250 Thailand

Tel: +66 (0) 2100 6386, +66


Load Cell Manufacturer Companies in Thailand (1)7

we offer:

Compression Load Cells CLA-NA (500N To 20kN)

product information

Pressed load cell, medium size (Drip-proof type)

Medium Voltage Load Cell environmental resistance Equivalent to IP67 Standard

Load capacity can be selected from 500 N to 20 kN.

Rate output 1.5 mV/V (3000 microstrain) ± 0.5%

Non-linearity ± 0.2%

Can be used in the temperature range from -10 to +60 degrees Celsius.

85/2, 85/3 Soi Sot Phin San, Rang Nam Road, Rajthevee, Bangkok 10400 Thailand

Tel : +66-2642-6700


Load Cell Manufacturer Companies in Thailand (1)

load cells are used to read weight, workpiece pressure, pull force, torque and transmit signals to the balance terminal or controller. to process, display

active industry

plaster platform

asphalt platform

truck scale

Industrial Raw Material Scales



Compression testing machine, the tensile strength of specimens

Products of the company that are used with Load Cell

Weighing Indicator

Load Cell Transmitter

Wireless Transmitter

Load Cell Cable

Summing Box



711/4 ซอย ปุณณวิถี 25 แขวง บางจาก เขตพระโขนง กรุงเทพมหานคร 10260

Load Cell Manufacturer Companies in Thailand (1)2


NVMS Co has been built on the fundamental belief in supporting our customers by providing solutions to address their areas of concern. Founded on this belief NVMS has grown to ensure we are equipped to support a variety of areas to meet our customers’ needs.

The hermetically encapsulated PW29 is a single-point load cell for high maximum capacities and large weighing platforms. The load cell is made of stainless steel and is ideally suited for precisely weighing huge loads; for example, in the food and beverage industry, as well as in the pharmaceutical industry.

PW29 delivers reliable measurement results in compliance with OIML R60 regulations even in tough operating conditions. This is due to the sophisticated measuring body design and specifically optimized strain gauge system and rugged design.

1 MD Tower, Level 13 (C1), Soi Bangna – Trad 25, Bang Na-Trad Road, Bang Na Nuea, Bang Na, Bangkok, Thailand 10260

P : +66 33 682 559

PECO Thailand

We are the most professional supplier of load cells in Thailand, customizing all kinds of load cells.

The CLR-NAH compression load cell can be used at high

temperatures. The inert gas-filled and hermetically sealed

structure offers stable measurement.

Protection ratings: IP67 equivalent

The CLB-NA Load Cell is a low-capacity, compression type load

cell. An internal structure with a fixed frame for strain generation

ensures high precision measurement.

Kelba Shearbeam Loadcell Model: KA-10,000N

The CLA-NA Load Cell has a diaphragm-type strain sensing

element. It is compact, easy to operate, and can be used to take

a consistent measurements.

บริษัท รีเสิร์ช อิควิปเมนต์ จำกัด

435 ถนนบอนด์สตรีท ตำบลบางพูด อำเภอปากเกร็ด จังหวัดนนทบุรี 11120

โทร. 02-059-0351 ต่อ 100, 102, 10


Load Cell Manufacturer Companies in Thailand (1)8

Electromechanical machine specially designed for

creep testing with S-type load cell, relaxation, low fatigue, etc. According to:

ISO 204, ASTM E139

The new optimized design of our IB-CREEP series leads

our machines a big step beyond, placing them as one of

the most advanced Creep testing machines in the world.


The New IB-CREEP series provides you with a wide range of testing

possibilities into the branch of Creep tests.

Call us:

+662-082-5521-2 ext 0

Berlin Jucker Public Company Limited

FAIRBANKS brand agent and seller in Thailand a load cell that is combined with specially designed mounting hardware. When combined in this manner, the weighing assembly can be placed on or under almost any type of vessel transforming the vessel into a highly accurate scale.

An Omnicell’s mounting hardware bears the full weight of a vessel’s load, then transfers the load to the load cell. The load cell measures the applied force and sends this information t an instrument, which displays a weight reading and other information for the system operator. Omnicells can convert tanks, conveyors, bins, hoppers, and similar vessels that contain dry or liquid materials, into dependable, accurate scales.

Berli Jucker House

99 Soi Rubia, Sukhumvit 42 Road, Phrakanong, Klongtoey, Bangkok 10110

Tel: (66) 0-2367-1199, 0-2367-1172


EGA AUTOMATION (2000) CO., LTD. We are working as a professional supplier providing high-quality, innovative, and environmentally friendly products for our customers in the automation industry. 

We offer:

UPP-100N Tension/compression type load cell Product outline Safe overload of 500%! High axial stiffness! 

UCC Compact compression type load cell    

SCB Loadcell with high stiffness and high response       Product outline “Virtually unbreakable!” – loadcell with an innovative concept! A strain gauge sensor with phenomenal rigidity and responsiveness. 

RTN Laser welded closed structure     Product outline Thin, high accuracy stainless steel load cell. Supports a wide measuring range! (1-470T)Can be used in tanks, truck scales, etc!

ULS Compact compression type load cell   Product outline Special steel with high hardness, wear resistance is greatly improved suitable for high cycle applications!

UNCLB Tension/compression type loadcell   Product outline Compact and lightweight easy-to-use loadcell for both tension and compression applications.

UNBF2 Compression type loadcell       Product outline Compact and thin design allows easy mounting on existing equipment

55/393 ม.7 ซ.พหลโยธิน 87 ถ.พหลโยธิน ต.หลักหก อ.เมืองปทุมธานี จ.ปทุมธานี 12000  

โทร: 02-997-8800   

Load Cell Manufacturer Companies in Thailand (1)66SEMTECH CO., LTD.

บริษัท เดมเทค จำกัด

Model SP8 is a low-profile single-point load cell designed for direct mounting in low-cost weighing platform sets with a small physical size, combined with high accuracy and aluminum construction, making this low-cost load cell ideally suited for retail, ben, and counting scales.

SB-3 is a low-profile shear beam load cell designed for high accuracy platform scales, pallet scales, and process weighing applications, Nickel plating, and full environmental sealing assure long-term reliability. A stainless steel option is available for use in harsh or corrosive environments

hemtech Co., Ltd.

Tel : 0-2693-7005

บริษัท เดมเทค จำกัด

ที่อยู่ 127 ซอยสีม่วงอนุสรณ์ ถนนสุทธิสารวินิจฉัย

แขวงดินแดง เขตดินแดง กรุงเทพฯ 10400


Load Cell Manufacturer Companies in Thailand (1)12

leading manufacturer of strain gauge based Load cells, Digital indicators, Crane scales, and Weighing systems since establishment in 1985… you have a better understanding so as to lead to a good decision on your business

we offer:

Load Cell เครื่องทดสอบน้ำหนัก โดยทาง Bongshin มีอุปกรณ์ทดสอบน้ำหนักอยู่หลายประเภทด้วยกัน ไมว่าจะเป็น

S- Beam ที่สามารถรับได้ทั้งแรงกด – แรงดึง  และสามารถรับน้ำหนักได้ถึง 5 t.

Shear-Beam สามารถรับแรงกดได้สูงถึง 10 t.

Single – point สามารถรับได้ทั้งแรงกด – แรงดึง  และสามารถรับน้ำหนักได้ถึง 250 kg.

Double Ended Shear Beam  สามารถรับแรงกดได้สูงถึง 15 t.

Comprssion & tention  เป็นรุ่นที่สามารถรับได้ทั้งแรงดึง และแรงกด รับแรงได้สูงสุดที่ 500 t.

Pancake รับได้ทั้งแรงกด และแรงดึง ได้สูงสุดถึง 100 ton


Finding the right load cell supplier is vital for your projects. When it comes to versatile load cells, there are different tension load cells or compression load cells. To find the correct and suitable load cells for your applications, you should consider finding good quality load cell sensors from reliable load cell supplying companies from the market.

Without looking further, we’re also a load cell supplier in China. CUBTEC aims to give purposeful reviews and information that is bound to save your time. In case of any questions, inquiries, or even comments, reach out to us.

If you’re looking for high-quality single point load cells, single-ended shear beam load cells, double-ended shear beam load cells, pancake load cells, ring load cells, bending beam load cells, canister load cells, miniature load cells, s type load cells, load pin, load shackles, truck scale load cells, inline load cells, and weigh modules with competitive price in China please contact us for details.

Send Your Inquiry Today

    Scroll to Top

    Get a Quick Quote!


      Get a Quick Quote!