IN-LINE LOAD CELLS FAQs

Introduction

The question of how the load cells work and why they are of great benefit hits people differently. As a result, we have received numerous questions and inquiries about the inline load cell, tension-compression load cell and related items, but it should not bother you a lot. It is since you will find multiple options go into making that decision.

With this article, you will understand all necessary and fruitful information. This article focuses on a load cell and an inline load cell and explains when to use them. The information provided here is concrete and enlightens you to make a wise choice in the usage of these load cells.

1. What Is A Load Cell? What Is A Inline Load Cell?

A load cell is a force transducer. It converts a force such as compression, tension, and pressure into an electrical signal that can be measured. While on the other end, an inline load cell is a tension or compression that is structured to be incorporated with an inline load axis to measure the weight. Aside from that, they are great for endurance, off-centre and press application.

With this, we can clearly say both load cells are for standardizing the tension-compression load cells. They are made of stainless steel material that is well-welded with a variety of miniature threaded inline load cells. It is to ensure that they are field-friendly and applicable for other necessary or prescribed settings.

2. How Exactly Does An Inline Cell Work?

An inline load cell works by converting forces. In other words, we can say it make the tension-compression with digital readout to do the recording. It is whereby the inner working of a load cell differs depending on what inline cell you pick.

Besides that, some types of inline load cells manage the forces by their weight. They are done by sending up voltage irregularities when under the inline load cells. It simply means that how inline cells work is easy and manageable. Though, it is necessary to be cautious when handling it. To make sure everything runs smoothly, you have to understand what instruments are to be involved with the usage of this device.

Additionally, it’s good to note that most types of load cells are used to measure. They measure the mechanical force, mainly the weight of objects such as the truck scale of concrete decks. Usually, they are used because of the weight accuracy. They are not only applicable for matters concerning weight but also other fields which require inline load accuracy.

3. Why Is An Inline Load Cell Suitable For Applications Where Size And Tight Environments Are Critical?

The following are some of the reasons why inline load cells are suitable applications. They are preferred where size and tight are critical because:

• They apply to both tension, compression and pancake load cells
• They offer high accuracy
• They have great stiffness
• They offer robust construction
• They as well have a broad capacity range with little mounting clearance required
• They are all-round cells from high to low profile load cells

Another reason is that the inline load cell works hand in hand with other types of load cells perfectly. These types are like the pancake load which is used in the application that requires less sensitivity to load condition and high precision condition. Just like inline load cells, pancake load cells are designed to be friendly on the nature of structure and extraneous loads.

In addition to that, an inline load cell is suitable for application in critical zones because it is extra strong. Also, it has great features that include integrated cables or power cables that make work easy. The cables are either connected to the positive or negative side.

4. How Accurate Is An Inline Load Cell?

To begin with, an inline load cell is famously known as a male thread. Since it is used as well as applied in tension-compression. It offers high quality of accuracy and stiffness with little mounting clearance required. This style of sensor is very advantageous because it can be used in various varieties of fields. They give the best recordings in their measurements because they are easy to read.

Also, they are perfect in endurance, pressing staff application, off-centre objects, fatigue applications etc. This means it can give and determine the tension load cell minimum and maximum accuracy. But, it is essential to be careful with inline load cell measurements to maintain the accuracy and its standard.

5. Should I Choose An Inline Load Cell Or An S Type Load Cell?

It is understandable that when it comes to choosing the right sensor is a not sure task. It is because there is no specific industry standard that shows how to do the picking. There are as well difficulties people do encounter mostly in finding compatible instrumentation. In this case, it is good to know that there are some steps you should consider to choose the best load cell for your application.

But when it comes to choosing between an inline load cell and an S type load cell. There are some characteristics you should understand about each. While the inline load is known as a male thread, the S type is referred to as a female thread. Below are other characteristics:

• Both offer high accuracy
• While S type load cell is thin performing best in a compact profile, inline is strong and best even in a low profile
• An inline load cell is great in endurance, press application and off-center objects.
• On the other end S type load cell sensor is great for automated control feedback and in-line procedure applications

Depending on your application on these load cells types; you are at liberty of picking one that meets and is suitable for intended works.

6. How Can I Connect Inline Load Cell Correctly?

It is very easy to connect inline load cells correctly so long as you follow the right steps. You should always be careful because the installation or perhaps the connection is done by electrical cables. But, since they are for measuring and standardizing the tension compress of a load cell, then it does not require much ado.

The following are some of the steps one should consider to connect an inline load cell correctly:

• The inline load cell cable is usually put through the metal tube
• The connection is then removed and later folded backwards and out
• There is always a gold pin that requires to be tightened
• Afterwards, it’s being connected to a connector called BNC until it is locked
• On top of the shield, the metal tube is drawn over it
• Finally, the excess is cut and then the metal is safely tightened.

Note. The output cables of an inline load cell consist of two power cables. These cables are referred to as positive and negative poles. Though, they usually have five cables in total and sometimes seven of them. The added two are called sensing cables.

7. What Is the Average Life Span of An Inline Load Cell?

By assuming you already understand the specifications of an inline load cell. Now we will focus on its life span. On the other end, it could also be called the fatigue life which shows the number of times a rated capacity can be loaded.

Generally, the life span of an inline load cell can last between 5 – 8 years. Also, it should have a weight capacity that is 100,000 times. It is because when loading occurs more than the time indicated (100,000) then the load cell will not perform appropriately. When this happens, it means your inline load cell needs to be replaced. It is necessary to replace it because of proper usage, great maintenance and protection.

8. Find Super Load Cell Manufacturer and Supplier?

Technically, to find a super load cell manufacturer and supplier who has quality products is simple. It is because there are several places where you can get the best load cell sellers from experienced manufacturers/suppliers. However, one should be cautious in selecting the correct manufacturer’s company to provide you with something that meets your needs.

When you want to buy these super load cells is easy. It is because all you need to do is to contact multiple manufacturers of your choice across the world. You can use the websites, search for various load cell manufacturers/suppliers and navigate to get the ones that suit your desires.

Aside from that, below are some well-known means that can help you know where to find super load cells easily. You can find them through:

• Local trade shows
• Google searching
• Made in China products
• Marketplaces visits
• Alibaba
• China brands and globalsource.com among others.

Conclusion

In conclusion, we believe and hope this article helps you to make an intelligent decision in purchasing an inline load cell. The truth of the matter is, many other manufacturers are producing these great devices or operating machines. We have just ensured that you get to understand their advantages, functions and other good services.

You can always contact us in case of any queries. Also, there are numerous high-quality inline load cells manufacturers in the United States and across the world. Those who build as well connect inline load cells perfectly. We recommend our products to you; try them and you will not regret it.