Industrial Crane Scale – Ultimate FAQ Guide

Introduction

CuBLiFT industrial crane scale is a unique type of scale majorly designed for handling weighing hanging loads. The crane scales are commonly used in weighing bulky and heavy loads. They come in a wide range of models and weight capacities. The critical solution that the industrial crane scale offers is the ability to weigh bulky and nonstandard oversized loads. Our industrial crane scale has a weight capacity of between 50 lb. and up to 100000lb. Another advantage of industrial crane scale is that they have rechargeable batteries, thus convenient and effective operations.

Due to their unique technical specifications, the industrial crane scales are commonly used in heavy-duty operations such as:

• Construction
• Transportation
• Marine and shipment
• Airport operations
• Production plants
• Warehouses

With modern technology available, the infrared remote-control option is on various industrial crane scales. The essential advantage of the crane scale is it allows additional partial load weight and the total weight upon weighing completion.

Figure 1: An image of Industrial crane scale     Figure 2: An image of Industrial crane scale  

Figure 3: An image of Industrial crane scale     Figure 4: An image of Industrial crane scale                    

What are Industrial crane scales’ technical specifications?

The industrial crane scale has a robust design that allows its application with heavyweights and various environmental conditions.

• Load capacity: the crane scale can weigh 50lb up to 100000lb.
• Rechargeable batteries
• Hook: It has a stainless rotatable hook
• High-quality load cells
• A 30-minute inactivity reminder
• Battery low voltage alarm alert
• Allows digital calibration
• Corrosion resistance

What are the different types of Industrial crane scales?

Industrial crane scales are designed to fit various industries. The industrial crane scale can be grouped into three types, namely:

• Heavy-duty crane scales: Explicit activities require particular crane scales. Heavy-duty crane scales usually are made rough. They come in two distinct types; Double and single brace scales. Single brace scales are designed to lift loads from 1 to 20 tons, while two support scales can lift from 1 to 150 tons. This optimization is mainly used for heavy applications.
• Digital crane scales: Industrial crane scales are typically made to withstand heavyweight with a simple to-utilize and rigid plan. Typically, the base weight lifting limit of these scales begins at 50 kg with a limit of 100 lb. A few scales are outfitted with gravity speed to increase innovation for continuous use in all puts over the world. The design of these crane standards is reinforced with OIML Class III precision and is covered with enough power to operate without discomfort in extreme conditions.
• Electronic crane scales: These industrial crane scales accompany electronic showcases an excellent plan. Because of the electronic presentations, the lucidness of these scales is unparalleled. The weight Due to electronic displays, the resolution of these scales is unequal. The load-carrying range of these scales ranges from 300 kg to 30 tons. Like computerized standards, electronic standards also comply with ISO principles. t-bearing limits of these scales may go from 300 kg to as weighty as 30 tons. Like the mechanical scales, electronic ones likewise consent to ISO principles.

What are the minimum and maximum weights for an Industrial crane scale?

Industrial crane scales have a vast weight capacity to choose from. The smallest industrial crane can accommodate 1 ton, while the largest or heavy industrial crane can accommodate up to 100000lb.

Also, the industrial crane scale has various models that have different weights and different weight increment allowances.

Load weights                                             Weight increment allowance

2204lb                                                               1.1lb

4409lb                                                              2.2 lb.

11023lb                                                           4.4lb

44092lb                                                          44.0lb

What are the key features of Industrial crane scales?

• High capacity
• Steel units
• Designed for heavy-duty operations
• Ability to be used in various working environments
• Allows digital calibration thus equipment efficiency
• Allows switch of measurements units, i.e., kilograms, pounds, and grams.
• Large led display that allows clear measurement readability.

What are the advantages of having an Industrial crane scale?

Using industrial crane scales have more merits compared to demerits.

• Ability to weigh outstanding shaped loads: Industries handle different loads; others come in bulky and awkward shapes. Industry crane scale allows weighing and measurements of such loads.
• Precise and accurate measurements: If you’re stacking a tanker, fabricating an airplane tire, or utilizing your scale to parcel out merchandise sold by weight, then, at that point, exactness and precision are urgent. A few models can withstand mechanical use while giving precise estimations inside 0.1 percent with a limit of 200,000 kilograms.
• Workplace safety: Having an Industrial crane scale, there is no need to move products to a gauging region with forklifts. A diminishing in forklift traffic implies fewer freedoms for mishaps, wounds, and misfortunes. Your activities will be more secure and more proficient.
• Saves time and labour cost: Dispensing with the need to move things to a particular checkpoint implies more long stretches of work toward expanding usefulness. Eliminating forklift traffic will permit you to keep your group zeroed in on acquiring and preparing client orders.
• Need little floor space: Industrial crane scale requires less space to operate. For the most part, space is at a higher cost than expected, and your offices cannot perform measuring area or floor level. The crane scale can be carried as far as you need to measure, which means you do not have to lose valuable space.

What are Industrial crane scale purchasing factors to consider?

• Usability: You need Industrial crane scales that are not difficult to utilize and peruse. Challenging to use models could offset the proficiency gains of utilizing crane scales and present a greater danger of mistakes and mishaps.
• Applications and Industry: Ensure the model you buy coordinates with your details and application needs. You’ll require a substantially more solid and uncompromising balancing scale for lifting enormous burdens on a building site or loading bay than for weighing more modest burdens in a store or stockroom. Likewise, you ought to consider whether you’ll have the option to join the scale to other gear, read the presentation screen from a long way off, or work the scale distantly.
• The weight capacity: Maybe the main factor to consider while picking an industrial crane scale is the standard weight of the load you’ll gauge. Few industrial crane scales can deal with loads that measure as much as 100,000 kilograms, while others are intended to give extremely exact estimations for little loads of 10 to 50 kilograms. Remember that the average most excellent weight shouldn’t surpass 66% of the most extreme allowable evaluated heap of the scale. Else, you will be overloading the crane scale, and the operator’s safety will be a stack.
• Assembling consistency: Ensure the organization you’re purchasing from makes and adjusts as per standards guidelines, particularly those identified with estimation esteems, units, exactness, and security.
• Exactness and precision: While choosing an industrial crane scale, focus on how delicate, or exact, the scale is. The estimation accuracy you’ll need will rely upon what you’re utilizing the scale for. Also, exactness may demonstrate critical reliance upon the application. Consider that load volume is fundamental, as cargo freight may move and cause disastrous mishaps if the heap is uneven.
• Working area conditions: Finally, you should consider the climate wherein you’ll utilize the crane scale. A few models work best at specific temperatures and dry conditions, while others are appropriate for all climate conditions and are impervious to residue and water.
• Flexibility: Ensure you Search for models that permit you to change measuring units. The industrial crane scale is much simpler, and the crane scale is easier to incorporate into your business operations.
• Installation by professionals: Heavy-duty industrial crane scales need professional attention in installation, maintenance, and calibration.

What are industrial crane scale operating warnings and cautions?

When operating an industrial crane scale, the following warnings and cautions should be observed:

• Handle the industrial crane scale with care.
• When installing the industrial crane scale, ensure the position is stable and free from vibrations.
• The crane scale should be placed away from sunlight.
• The industrial crane scale is ideal for indoor use.
• Try not to work the scale in unsafe regions or conditions.
• Do not associate links in manners other than those referenced in this manual.
• Avoid using the crane scale in hazardous conditions.
• Be sure to set an industrial crane scale on a firm, stable, even surface.
• Never be biased or biased on this topic. Hardware falls or cracks, which can lead to wear and tear and injury.
• Before moving the item, unplug it and unplug all links associated with it.
• When putting away, moving, or returning the scale for administration, consistently utilize the first bundling.
• The power supply source should be known before any operations.
• Protect the crane scale from foreign materials.
• Do not use the crane scale in explosive or humidity areas.
• In case of industrial crane scale malfunctions, unplug it and be checked by the authorized personnel.

How many parts does the industrial crane scale have?

The Industrial crane scale is made up of several parts to be functional.

• Display front view
• Remote control
• Load cells
• Opto and port isolator output
• U steel girder

What is the unpacking procedure of an Industrial crane scale?

• Cautiously eliminate the industrial crane scale, ac connector, just as the controller and radio wire (discretionary) out of the bundling.
• In the wake of eliminating the entirety of the parts, position the crane scale on a tabletop surface.
• Utilizing scissors, cut the plastic tie lashes, which get the snare during delivery.
• On the off chance that a discretionary controller is bought, mount the distant radio wire onto the crane scale by immovably screwing it into the radio wire port situated on the left side.
• In the wake of collecting the unit, plug in the AC connector to the AC connector attachment situated on the right side of the scale. Leave the connector connected for

At least 3 hours to charge the scales inside the battery.

• When the battery has been charged, the scale perhaps introduced.

What to consider on industrial crane scale battery operation?

The industrial crane scale is fitted with at least three 2.7 v internal rechargeable batteries. The batteries allow 1000 charging cycles and can last up to three years.

• To increase the battery’s operating life, ensure the crane scale backlight mode is set.
• Always ensure the crane scale batteries are fully charged before unplugging from the power source.
• When the industrial crane scale is using batteries, always enable the ‘Auto Off’ function. This allows the scale to turn off 5 minutes of inactivity automatically.

What functions does an Industrial crane scale remote control have?

After removing the controller, introduce the four AAA batteries to the industrial crane scale. To do this, open the remote entrance by moving the security switch to one side. After moving the safety switch, open the battery cover by lifting it to the left. When introducing the batteries, make sure to utilize the right extremity (+/ -). To start using the controller, press the on/Off key. As a matter of course, the controller is set to get and send information to the unit utilizing the RF channel.

The industrial crane scale remote control has ten buttons that have different functions.

• Menu button: Allows the remote-control primary menu access.
• Enter button, and T: accepts the selected Menu.
• Arrows buttons: allows to navigates the main remote Menu.
• 0 button: Ensures the crane scale is at zero.
• B/G: Shows the gross load weight.
• Print: If selected, it okays the print of measurement data.
• ON/OFF: enables and disables the remote control.
• Backlight: allows LCD remote backlight.
• HR: Shows the weighing measurements with higher resolution.

What are basic industrial crane scale principles of weighing?

The weighing principles include:

• Ensure proper zeroing of your industrial crane scale. When the industrial crane scale is zero, the same is indicated on display. In case the industrial crane scale is not reading zero, press the zero key.
• Weighing permits taring over the whole weight territory. This is refined by squeezing the Tare key (→T←). Care ought to be practiced when tare is being used to ensure that the scale’s most outstanding limit isn’t over-burden.
• Accurate measurement results should not be taken unless the safety indicator shows that the indicator result is stable and the hanging load from the bend is constant.
• For best outcomes, place the obscure load in the focal point of the container.
• Continuously shield the industrial crane scale from the soil, residue, and destructive fluids when Cleaning utilizes a spotless material with cleanser and water, and afterward dry with a perfect wiper.
• Utilize the “Dynamic” capacity to redo the scale’s fundamental Menu and debilitate capacities that are not utilized.
• This utilizes the primary Menu quickly and simply.

• Continuously secure the gauging load on the snare with additional alert to ensure it won’t tumble off.

What are Industrial crane scales weighing and taring procedures?

• Press the power button to start the weighing process, and the industrial crane scale will go through its instatement strategy and naturally enter “Gauging Mode.” The industrial crane scale is prepared to begin weighing when the adjustment and zero pointers show up on the presentation.
• When gauging, consistently drape each load on the industrial crane scale’s snare with alert and ensure it is securely gotten. The gauged result might be taken when the adjustment marker shows up on the presentation.
• In the event that a hanging load is utilized for gauging, it very well might be tared. In taring the dish, the industrial crane scale takes away the heaviness of the container from the gross load to acquire the net weight.
• To tare the hanging container, balance it on the snare. The container’s weight will be displayed on the showcase.
• When the indicator stabilizes and appears on display, the industrial crane scale is ready for tare.
• Once the taring process is finished, the NET indicator will be lit, and the weighing display shows 0.00grams.
• Find the abnormal load on the hanging dish with the stars. Net weight is shown.
• To acquire the gross weight (Tared dish + obscure weight), press the B/G key.
• To extend the industrial crane scale resolution, press HR Key to increase the scale resolution.
• When the industrial crane scale display is not indicating zero, press the Zero key before any weighing is done.

How to set the unit of measure on the Industrial crane scale?

Industrial crane standards operate in nine distinct dimensions: grams (g), kilograms (kilograms), carats (CT), pounds (lb.), Newton, grain, ounces, ounces troy, pennyweight. By processing the plant by default, the crane scales a few grams (lb.). To choose an alternate unit of measure, here the steps:

• Press the MENU key to select the Main Menu.
• Once the UNITS command displays, press the T key
• The industrial crane scale will indicate the units of measures available.
• Once the selected unit displays, Press the T key to okay the selection.
• Once the unit of measure selection is done, the scale automatically resets to weighing mode.

How do you do percent weighing on the Industrial crane scale?

When it comes to percent weighing on an industrial crane scale, two functions are essential:

• PER On: Enables the percent weighing.
• PER Off: Disables percent weighing.

Percent weighing is utilized for communicating the heaviness of an item as a level of the put-away example weight. To use percent gauging, follow these means:

• Hang a compartment or a balancing dish on the snare and press the T key to tare.
• When the industrial crane scale has been tared, place the example reference weight on the skillet.
• The heaviness of the example will be shown as it is put on the container. When the weight of the sample balances out and the strength pointer shows up on the presentation, press the MENU key to enter the principle menu.
• At the point when “PERCENT” is shown, press the T key.
• Orders “PER OFF” and “PER ON” will be shown consecutively. To continue with percent gauging, what’s more, set the reference test weight, press the T key when the order “PER ON” is shown.
• When the reference test weight is set, the scale will communicate the load as a rate.
• Eliminate the example and spot an item in the skillet. The industrial crane scale will communicate the heaviness of that article as a level of the put-away model.
• To leave percent gauging and get back to essential gauging, select “PER OFF” from the percent menu.

What is an industrial crane scale calibration procedure?

The industrial crane scale calibration is vital as this ensures the operator achieves accurate and precise weight measurements.

For most industrial crane scales purchased from authorized manufacturers, the calibration process is already done on the crane scales.

When your industrial crane scale needs calibration, there are three function options that you need to know before the calibration process.

• CAL Stp: initiate the stepped calibration. This is commonly done when using multiple calibration weights.
• CAL On: Quick calibration is initiated and done when using a single calibrating weight.
• Other: This is done when the calibration process involves unequal load to that of crane scale capacity.

Calibration involving external weights should be done if the scale displays wrong readings or occasionally guarantees the exactness of all gauging results. The industrial crane scale ought to be aligned with a high exactness weight equivalent to its most outstanding limit. Before beginning alignment, have the proper adjustment weight accessible.

The industrial crane scale can be calibrated into ways:

• Quick calibration: that involves a single calibration weight.
• Stepped calibration: that involves multiple calibration weights.

• Stepped calibration

This one involves multiple calibration weights. The following are its steps:

• Press the menu key; When the “Calib” option is shown, press the T key, then select the alternate “CAL STEP” by pressing the T key.
• The scale shows the total adjustment mass equal to the scale range, i.e., “50”, and the option to select the optional adjustment mass “Other.” To adjust the industrial crane scale with a mass equal to the scale range, press the T key when the setting mass value is shown (proceed to step 4). To adjust the scale with a mass less than the intensity of the scale, press T when the “other” is shown (proceed to step 3).
• If the choice “other” has been chosen, a ran line will be shown to physically enter the specific worth of the adjustment mass used to align the industrial crane scale. To physically enter the adjustment value, use the accompanying keys: C key to increasing the digit, T key to accept and move to the following number, Accept the decimal path, and the whole setting Menu key.
• Once the display shows ‘Press Menu’ and ready to tare the industrial crane scale, press the Menu.
• Once the tare is done, the LOAD will show on the industrial crane scale display. Place the calibrating weight on the pan and press the Menu key to start the calibration process.
• The ‘CCCCC’ displayed indicates that the calibration process is in progress.
• Once the calibration process is done, the calibration process is done, the industrial crane scale automatically resets back to weighing mode.
• Quick calibration

This one involves multiple calibration weights. Here are the steps involved:

• Press the MENU key; when the choice “Calib” is shown, press the T key, and afterward select the alternative “CAL Stp” by press the T key again.
• The scale will show an entire adjustment mass equivalent to the industrial crane scale limit, i.e., “50”, and a choice to choose an alternate adjustment mass “other.” To adjust the scale with a mass worth equivalent to the scale limit, press the T key when the alignment mass worth is shown (continue to stage 4). To adjust the scale with a mass lower than the industrial crane scale’s most extreme limit, press the T when “other” is shown (continue to stage 3)
• In the event that choice “other” has been chosen, a ran line will be shown demonstrating to physically enter the specific worth of the adjustment mass used to align the scale. To physically enter the adjustment esteem, utilize the accompanying keys: the C key to increasing a digit, the T key to acknowledge and go to the next digit, embed a decimal, and the MENU key to recognizing the whole setting.
• Once the display shows ‘Press Menu’ and ready to tare the industrial crane scale, press the Menu.
• When industrial crane scale tare is performed, the LOAD shows up on display.
• Place the calibrating weight on the pan, and the calibration process will automatically initiate.
• Once the calibration process is completed, the industrial crane scale automatically resets back to weighing mode.
• After the calibration process is over, put away the weight used away.

What details are in a receipt printout of an Industrial crane scale?

After every load weighing process, the operator may need to print out the transaction receipt.

The receipt can also be customized to fit the information needed.

• Header: This includes the critical industrial crane scale unit information: resolution, mode number, maximum capacity, and unit serial.
• Date and Time: Shows the time and date of performed transaction.
• Operator identification number: Indicates the operator’s ID NO. during weighing processes.
• Product ID: It’s the identification number of the load being weighed.
• Printout number: The number of transaction receipts.
• Count: counting results.
• Net: Weight is the net result of the transaction.
• APW: Average piece weight of both counting functions and counted parts.
• Tare: Indicates the tared weight of the industrial crane scale.
• Total: grand weight measurements obtained and totalized.
• Gross: weighing gross transaction weight.

How do you do enable and disabling time and date stamping on an industrial crane scale?

To enable or disable the time and date stamping on the industrial crane scale:

• Press the Menu key, select the time or date displayed and press the T key.
• The industrial crane scale displays options such as Dat On, Dat Off, Dat Pin. Enable date by pressing the T key after the ‘Dat On’ is displayed.
• To disable the date, press the T key when the ‘Dat Off’ is shown.

Setting up the date and time on an Industrial crane scale involves various steps:

• Press the Menu key, select time or date displayed, press the T key, and press the T key again to okay the selected Date option.
• After the selection and setting of the date, the current date is displayed on the industrial crane scale.
• Time changes have two modes that are PM OR AM.
• After selecting the time, press the T key to select the displayed modes, i.e., PM /AM.
• Once all time selection and settings are completed, the industrial crane scale displays the current time automatically.
• In case of any changes with time, press the T key.
• When the time also displays, the current year is indicated.

How do you enable the pin access to the Industrial crane scale date configuration?

Industrial crane scale configuration of current time and date can be secured with a PIN. Once the pin is set, the industrial crane scale operator will be needed to enter the PIN to do changes.

• Press the Menu key to set the PIN. Once the date displays, press the T key, select Dat PIN, and press the T key again.
• A dashed line is displayed, and you can now enter the desired PIN. To move to the next digit, press the T key. Press the Menu key to okay the process.
• In the wake of setting the PIN, you will be approached to enter the pin to get to the “Date and Time.” To eliminate or cripple PIN access, enter the “Date” capacity and key in the current PIN. After getting to the “Date” menu, select the alternative “Datin” and don’t enter another PIN. Press the MENU key with the ran line showed—date DATPIN.

How do you do totalize on the Industrial crane scale?

The following are function options that will enable the totalizing process of the industrial crane scale.

• Tot Prn: Indicates the total transaction prints.
• Tot o: Allows prints of weight measurements before any additions.
• Tot Off: Shows and disables the transactions total.
• Tot -: Allows addition of weight measurements to the total while not printing.

The following are few steps to follow when totalizing the industrial crane scale:

• Hang a compartment or a hanging skillet and press the T key to tare.
• Press the MENU key; when the alternative “Absolute” is shown, press the T key, and afterward select the choice “Tot o ” or “Tot – ” by press the T key by and by.
• The presentation will peruse 0, demonstrating that you may put the initial item into the compartment when the heaviness of the article is balanced out, press the information move key to acknowledge, and add the item weight to the aggregate.
• When the weight has been added, eliminate the article from the gauging container.
• Trust that the industrial crane scale will get back to 0 and spot the second article on the container when the article’s heaviness settled. Press the information move key to acknowledge and add the subsequent item weight to the aggregate.

What are the steps of configuring and disabling the Industrial crane scale display backlight?

To configure or disable the LCD backlight of the industrial crane scale, the following functions options are key:

• B-L OFF: LCD backlight disabled.
• B-L ON: LCD backlight enabled.
• B- L ECO: LCD backlight disabled due to 30 sec of inactivity.
• B-L BAT: LCD backlight disabled when there was no weight on the industrial crane scale for 30 sec.

The steps are as follows:

• Press the Menu key; once the B-Light displays, press the T key.
• The industrial crane scale displays the available backlight settings.
• Press the T key to select the backlight setting displayed.

How do you change grams(g) to pounds(lb.) on an Industrial crane scale?

The critical function option used to configure the unit measurements in an industrial crane scale is ‘lb—Bal’.

Lb Bal allows the crane scale resolution and accuracy, enabling and disabling pounds as a  industrial crane scale default unit.

• To disable the default unit of measure (pounds) into grams, press the Menu key and press the T key.
• The industrial crane scale shows the “LB Off” and “LB on” options. To select disabled pounds and select grams as the default unit of measurement, press the T key when the grams are shown, and the “lb. off” when selecting pounds is shown.

Can one customize the Menu of an Industrial crane scale?

Customizing the Menu of your industrial crane scale means deactivating unused main menu features or functions. Passive functions do not appear on the industrial crane scale display.

Here is how to customize your industrial crane scale menu:

• Press the MENU key; when the choice “Dynamic” is shown, press the T key, and afterward select an ideal capacity or highlight by press the T key by and when the name is displayed.
• The scale will show choices “ON” and” Off.” To handicap a capacity from showing up in the Main Menu. Press the T key when “Off” is shown to empower a capacity to show up in the Main Menu press the T key when “On” is displayed.

How do you restore the Industrial crane scale to the default setting?

Restoring your industrial crane scale into the default setting means allowing your crane scale to initially has the original factory settings.

• Press the menu key; once the default displays, press the T key.
• The scale will show choices “Yes” and” No.” To reestablish the industrial crane scale’s plant setting, press the T key when “Indeed” is displayed. To drop, press the T key when “No” is displayed.

What are common errors and troubleshoot for an Industrial crane scale?

The industrial crane scale has at least eleven errors that are always displayed on the industrial crane scale display.

• —–: this one is when the crane scale is below zero. Press the Zero key until the industrial crane scale is at zero again.
• –: Taring is not allowed. Place the weight on the industrial crane scale pan before tare is done.
• L: Pan error. Ensure the pan is stable.
• H: Exceeded capacity. Ensure the industrial crane scale capacity is observed.
• Apply LO:  Too low Average piece weight.  Ensure the Average piece weight is greater.
• Appl LO (weighing percentage): Too low sample weight. Increase the sample weight.
• Crane scale not turning on: Power failure: check the AC power adapter connection.
• Inaccurate weighing results: Need for calibration. Ensure the industrial crane scale is well calibrated.
• Unstable weighing results: environmental conditions. Ensure the industrial crane scale is away from vibrations.

What are Industrial crane scales warranties terms?

Upon purchasing an industrial crane scale from CuBLiFT, the equipment comes with its manual and warranty.

The warranty enables the owner to receive certain services concerning the equipment in a given period. CuBLiFT equipment and machines are warranted against defects under services.

This guarantee is stretched out just to the principal buyer. This restricted guarantee won’t make a difference if, upon assessment, it is tracked down that the item was altered, abused, over-burden, or

misused, set in an ill-advised climate, inappropriately introduced or changed, utilized for a reason other than that for which it was planned, or fixed by unapproved staff.

Under this guarantee, the company’s responsibility is restricted to outfitting work and parts essential to cure the imperfection covered by this guarantee and reestablish the item to typical working condition. Buyers might be charged the least fixed charge for in-guarantee items returned for a fix if those items are resolved without issue.

To make a case under this restricted guarantee, acquire a Return merchandise authorization number from CubLiFT and return the industrial crane scale, carefully pack the equipment, delivering paid ahead of time, with the RMA number composed on the returned item.

What procedure do you consider in Industrial crane scale maintenance and Cleaning?

• Disconnect the A/C adapter from the power source before cleaning starts.
• Clean the industrial crane scale exterior with a soft and slightly damp cloth.
• Avoid liquid contact with crane scale.
• Avoid pressure application on the LCD.
• Avoid using corrosive chemicals to clean the industrial crane scale.
• Use alcohol to clean the stainless parts of the industrial crane scale, pan, and draft ring.

 You may find more types of crane weight scales here: